You can 3D print a steering wheel for your Xbox One, but you probably shouldn't

Ane of my favorite places on the internet is a site chosen Thingiverse. You can spend hours there looking for amazing things to impress and sometimes y'all discover one that catches the imagination, like this little ditty from user pixel2. It is a very simple yet elegantly designed rack and pivot steering wheel to fit on your Xbox I controller.

I'm going to take you through a little step by stride on how to impress information technology and put it together and so you can come across how unproblematic it is but earlier nosotros go further let me offer a give-and-take of warning. This steering bicycle is a fun idea that is incredibly well idea out and engineered but it is not going to win you many competitions or make y'all better at driving games. It's a fun thing to evidence off to your friends but it blocks also many of the buttons to be truly useful it tin can scuff your controller if you are not careful. Anyhow, let's have some fun.

The 3D Print

In one case y'all accept downloaded the STLs from Thingiverse hither, you lot can load them into your favorite slicer, I used Simplify 3D, and you should impress them in the orientation that they get in. Information technology does mean using a fair amount of supports on the chief clip but trust me, information technology'due south worth it to get the right strength for the parts.

Pixel2 does recommend using 16 walls, no top or bottom layers and zero percent infill, an unusual approach but it seems to work well to add strength and durability. If y'all are using a 0.4mm nozzle, like almost people exercise, and then print this at 0.2mm layer summit for best results. I used these exact settings and apart from losing a little bit of support the print looks bang-up. I used the AmazonBasics translucent red to impress information technology because red makes you get faster, but ask Ferrari.

More: Is AmazonBasics Filament any skilful?

The build

The build itself ended upwards existence very easy once I figured out the right lodge to place the pieces. You will need to find a 22mm skateboard bearing to become with the 3D printed parts you accept fabricated, they are the same ones y'all find in those fidget spinners that were a fad for about an hour, so you can break ane of those open to go information technology. After y'all have that make sure yous put the begetting in the clamp first not the wheel. I did that the first fourth dimension and couldn't get the wheel to fit afterward.

As shown in the Gif you need to put the clamp on outset, if you are thinking of keeping it on for a while mayhap buy some super thin felt to go on the back every bit padding to end information technology scratching your controller. Once that is settled yous can make quick work of putting the begetting in then attaching the pin to the controller cap. Once you have that all set attach the cap to the controller thumbstick, settle the wheel into place and you are ready to race!

Final thoughts

This is very cool, information technology really is. Someone solved a problem nosotros never knew we had and it looks really cool doing it, only do y'all actually want to utilize this? probably non. With the wheel attached you tin't reach the Select and Menu buttons, and you are completely blocked from the right stick which, granted, you lot rarely use in racing games but it however frustrating to take your buttons blocked in that way. The bottom of the clamp too sits in the headset connector and while it doesn't interfere with the iii.5mm jack there are plenty of people who apply the old style.

What exercise y'all think? Is this something you would like to print? take you already? what practice you think of the control it gives y'all? permit me know answers to whatsoever of these questions in the comments.

Best (and cheapest) 3D printers for Windows users

Source: https://www.windowscentral.com/you-can-3d-print-steering-wheel-your-xbox-one-you-probably-shouldnt

Posted by: olsonsiblen.blogspot.com

Share this post